Inhaltsverzeichnis   MOBOTIX Online-Hilfe Sprache: en  

CGI Parameters of the MOBOTIX Camera

To retrieve images of the camera directly from the integrated web server, you can use one of the following HTTP commands:

Notes:


Parameters for image.jpg

Parameter=Default Values Explanation
help   Help
This overview.
current   Current Live Image
Output image from /record/current.jpg
All other parameters are ignored.
config   Current Configuration
Output image with parameters from current configuration file
Other parameters will overwrite them.
fip=10.0.0.0  Escaped string Factory IP
Will only deliver an image if the camera has this factory IP address.
error=picture picture
empty
content
current
Error Handling
Sets the error handling options in case no image is available:
picture: returns the "No frame available!" image
empty: returns nothing
content: returns only the content type
current: returns the current.jpg image
imgprof=  Escaped string Image Profile
Load parameters from this image profile.
At first, the current configuration is read and will be overritten by image profile settings.
Image Parameter    
camera=live right
left
both
pip
RiL
LiR
live
Camera Selection
Camera lens used for JPEG conversion.
Note: A Day&Night camera always shows the appropriate image sensor depending on the current illumination.
size=640x480 1280x960
640x480
320x240
160x120
640x240
Image Size
Resolution of converted JPEG.
automatic=auto off
auto
day
night
inactiv
autoonly
Automatic Image Improvement
Set the image improvement mode:
off/inactive: contrast will not be improved
auto/day/autoonly: normal auto contrast
night: auto contrast with more clipping
brightness=0 -10..10 Brightness
 
backlight=4 -10..10 Backlight Correction
Increases brightness of darker points in the image.
color=0 -10..10 Color Saturation
-10 will output B&W image.
blue=0 -20..20 Color Balance for Blue
Adjust blue balance.
red=0 -20..20 Color Balance for Red
Adjust red balance.
sharpen=4 -2..20 Sharpen
Negative values wil blur the image.
quality=80 1..100 JPEG Quality
 
textdisplay=enable disable
enable
datetime
Text Display
Enable or disable text display:
datetime displays date & time only.
textbgopacity=0 0..100 Text Background Opacity
Opacity of the background color in percent.
textbgcolor=0x000000  Escaped string Text Background Color
Enter hex color: 0xRRGGBB
Default black=0x000000
stitchmode=left_top off
left
surround
left_top
Cover Borders
Covers the borders of dual images (RiL, LiR, Both) with bars.
date=0 0..7 Insert Date & Time
0 = off
1 = Date, time zone, time
2 = Time
3 = Time, milliseconds
4 = Date
5 = Long date
6 = Date, time & milliseconds
7 = Time zone
print=  Escaped string Customized Message
The message text follow CGI syntax rules:
'%0A' for return, '+' for space and so on.
mirror=no no
vertical
horizontal
both
Mirror
 
rotate=0 0..360 Rotate
Currently only 0° and 180° available.
darknoisesuppress=medium off
medium
high
Noise Suppress
Specify the noise suppress mode.
showlogo= MXLOGO-320
MXLOGO-640
MXLOGO-1280
MXLOGO-VGA2
Image Link Logo
Logo profile for image.
Repeat parameter to display more logos at once.

Except for the help and current parameters, you can combine any number of parameters in any order.

Parameters for faststream.jpg

Parameter=Default Values Explanation
help   Help
This overview.
stream=full full
MxPEG
mxg
Stream Type
Image data in stream:
full: full JPEG images
MxPEG: MOBOTIX optimized JPEG
mxg: MxPEG Clipfile; not server push
needlength   Need Content-Length
Send HTTP content-length for every frame in server push stream.
Note: This option is not useful for browsers.
jpheaderupdate=0 0..1000 Frames between tables refreshs
Table refresh count. 0: off, 1: every frame, 2: every second frame, ...
jpheaderrefresh=10 0..60 Seconds between table refreshs
Table refresh time. 0: off, 1: every second, 2: every second second, ...
fps=1  Escaped string Frames per Second
Frame rate of streamed images:
e.g. '3.0' streaming with 3 frames per second. Set to 0 for maximum rate.
framecount=0 0.. Frame Counter
Amount of images delivered before stream stops (0=infinite).
fip=10.0.0.0  Escaped string Factory IP
Will only deliver an image if the camera has this factory IP address.
error=picture picture
empty
content
current
Error Handling
Sets the error handling options in case no image is available:
picture: returns the "No frame available!" image
empty: returns nothing
content: returns only the content type
current: returns the current.jpg image
html   HTML Page With Stream
Output HTML page including stream.

 

Parameters for event.jpg

Parameter=Default Values Explanation
help   Help
This overview.
sequence=head  Escaped string Sequence Number
Accepted values are
0..999999: Number of Sequence
head: last sequence
tail: oldest sequence in buffer
offset=0 -999999..999999 Sequence Offset
Set an offset to the sequence number.
eno=0 -1..99999 Event Offset
Set an offset to the event number.
Accepted values are
-1: last event found in sequence
0 = E00000.jpg
1 = E00001.jpg
2 = E00002.jpg
...
story=0 -99999..99999 Story Offset
View an image or clip file out of the story:
-3 = A00001.jpg
-2 = A00002.jpg
-1 = A00003.jpg
0 = E00000.jpg
1 = P00001.jpg, M00001.jpg or C00001.jpg
2 = P00002.jpg or M00002.jpg
3 = P00003.jpg or M00003.jpg
...
direct=0 -99999..99999 Direct Story Offset
Directly load the story image or clip file without retrieving a story size:
-1 = A00001.jpg
-2 = A00002.jpg
-3 = A00003.jpg
0 = E00000.jpg
Same procedure as Story Offset on post alarm files.
source=auto auto
intern
extern
Image Storage Source
Select the image storage:
auto: perfer external, but use intern on fail
intern: use the internal event buffer
extern: use the external storage
fip=10.0.0.0  Escaped string Factory IP
Will only deliver an image if the camera has this factory IP address.
error=picture picture
empty
content
current
Error Handling
Sets the error handling options in case no image is available:
picture: returns the "No frame available!" image
empty: returns nothing
content: returns only the content type
current: returns the current.jpg image
output=jpeg jpeg
m1img
evtinfo
evtinfo_d
mxg
Output Format
Output format of event JPEG:
m1img: print JPEG comment M1IMG
evtinfo: print event information: e.g. recoding mode, story count and event number
evtinfo_d: print normal and detailed event information: e.g. story size, frame number and time stamp
mxg: entire event story in one clip file.
event=  Escaped string Event Number
This Parameter is obsolete! Use the sequence argument instead.
Accepted values are
0..999999: Number of Event
head: last event
tail: oldest event in buffer

Andere Sprachen: de, en

©2001-2017 MOBOTIX AG, Germany · http://www.mobotix.com/